DOWNLOAD SAMPLE SOFTWARE AND TESTS

DOWNLOAD DISTRIBUTION SOFTWARE AND SAMPLE TEST

Click Here for an overview of the basic instructions.

DO IT YOURSELF...Download and install (1) the "Distribution" version (run-time engine) of the Test-It Series® Software and then (2) download and install any or all of the Sample Tests from our online archive.

Note: This software has an active version of the Study-It® and Test-It® software. The other applications are disabled. When you buy a license for the software you will receive a fully activated version of The Test-It Series® Software Distribution System which includes Make-It®, Change-It®, Study-It®, Test-It®, Share-It®, and Send-It®.


STEP 1
Download and install
Distribution Engine

We suggest that you print-out and read this entire page of instructions before you begin.

STEP 1: Download and install our free sample software on your computer. You may download (1) a single, large file (for a "hard drive" or "CD" type installation), or (2) three smaller files (for a "three floppy disk" type installation). (Note: These instructions assume that your hard drive is named "c:". If not, please substitute the appropriate drive letter.)

OPTION 1 - To download a large single file to your hard drive, follow the "Option 2" instructions below.

  • Create a temporary directory c:\temp1\ on your hard drive.

  • CLICK HERE to download tis.exe (approximately 4 mb). When your browser asks for a destination for tis.exe, locate and choose c:\temp1.

  • Using File Manager or Windows Explorer, locate c:\temp1 and double-click tis.exe to expand it into files setup.exe, setup.2, and setup.3.

  • You may now skip to "To install the downloaded and uncompressed files" below. Click Here

OPTION 2 - To download three, separate, smaller files follow these instructions.

  • Create a temporary directory named c:\temp1\ on your hard drive.

  • CLICK HERE to download Disk A (approximately 1.4 mb). When your browser asks for a destination for file diska.exe, specify drive c:\temp1.

  • CLICK HERE to download Disk B (approximately 1.4 mb). When your browser asks for a destination for file diskb.exe, specify c:\temp1.

  • CLICK HERE to download Disk C (approximately 1.0 mb). When your browser asks for a destination for file diskc.exe, specify c:\temp1.

  • Locate c:\temp1 and double-click diska.exe to expand it. Repeat with diskb.exe and diskc.exe.

  • Expanding the above files will create the files setup.exe, setup.2, and setup.3 in the c:\temp1 directory. (These files can then be copied to separate, blank disks for archive or installation purposes. See below.)

To install the downloaded and uncompressed files:

  • Double-click on c:\temp1\setup.exe to install the software. Follow the onscreen instructions. (All module icons will install on the desktop. Only Study-It® and Test-It® will be enabled.)

  • Create an archive set of installation disks. Copy setup.exe, setup.2 and setup.3 to separate floppy disks as a "master copy" in case you need to reinstall them later. You may now delete them from c:\temp1, and remove this directory from your hard drive.

    Note:

    1. Study-It® and Test-It® are fully operational and are not disabled in any way. They can be used to view, study and take the sample tests available from this website. They may be used in accordance with the License Agreement that is displayed by the programs.

    2. Make-It® and Change-It® will be disabled until you purchase a valid license. (*Demo mode - In the demo mode, tests may be created and edited with Make-It® and Change-It®, but cannot be saved or opened by Study-It® or Test-It®.

    3. Share-It® and Send-It® are disabled until you obtain a valid license. (*Demo mode - In the demo mode, Share-It® operates normally in the demo mode, but produces disks that will not install.)

    4. In general, Make-It®, Change-It®, Share-It® and Send-It® will operate in the demo mode* until you purchase a valid license.


STEP 2
Download and Install
A Sample Test
SAMPLE TESTS

STEP 2: Download sample tests and install them on your computer. Additional examples can be downloaded from CRAM4EXAMS.COM and BUYEXAMS.COM. These website entities were sucessfully based on and created with our software system and offer "FREE TESTS" in several categories of study.

(Note: These instructions assume that your hard drive is named "c:" and you want to download our sample test titled "History". If not, please substitute the appropriate drive letter and file name.)

Instructions:

  • Create an empty, temporary directory such as c:\temp2\ on your hard drive.

  • Choose a sample test to download. Click as indicated above. (For the sake of demonstration, we shall assume that you chose the sample test on "history".)

  • When your browser prompts you for a file destination for the file, choose c:\temp2.

  • Double click on c:\temp2\history.exe to expand it.

  • Double click on c:\temp2\setup.exe to install the test. When installation is completed, an icon will be placed on the desktop using the Test-It® module as the program associated with opening it. (If you wish to review it with Study-It®, return to the desktop, double-click the Study-It® icon, select the file name and click "OK".)

  • Delete all of the files from c:\temp2 directory.

  • Repeat the process to download another sample test. Repeat the above instructions to install it on your hard drive.

  • Delete all of the files from the c:\temp2 directory and remove the directory from your hard disk.

  • An icon for each test loaded will be placed in the Test-It® desktop group. Double-click on one of them to open a test in the Test-It® mode. (Note: To "study" this test and check the answers, double-click the Study-It® module's icon on the desktop, select the correct test's file name, such as "c:/test-it/tests/quitam.tes" and double-click on it. Use the "INFO" button to research the answers.)

[ HOME ] [ MANUAL ]